- Fax: 0755-29654683
- E-mail: SYLGROUP@126.COM
Processing of stainless steel
Stainless steel processing means with the performance of the stainless steel cutting, folding, bending, welding and other mechanical machining process of industrial production finally obtained the required stainless steel products, stainless steel processing in the course of the need to use a lot of tools, equipment, stainless steel Processing Equipment. Stainless steel processing equipment classified into shearing equipment and surface treatment equipment, cutting equipment is divided into Kaiping equipment and slitting equipment. In addition, the thickness of the stainless steel division, there are cold and hot processing equipment division. Thermal cutting equipment are plasma cutting, laser cutting, water cutting.
Original face: after NO.1 hot rolled annealed and pickled surface. Generally used for cold rolled material, industrial tanks, chemical plant, etc., the thickness
By the thick 2.0MM-8.0MM.
Blunt surface: NO.2D cold rolling after heat treatment, pickling, its material is soft, silvery sheen surface, for deep drawing processing, such as automobile parts, water pipes and so on.
Matte: NO.2B after cold rolling after heat treatment, pickling, and then to finish processing the surface of the light to moderate person. Since the surface is smooth, easy to regrind, make more bright surface, widely used, such as utensils, building materials and so on. Adopted to improve the mechanical properties of the surface treatment, meet almost all uses.
NO.3 with a No. 100-120 grit abrasive belt grinding out product. It has better brightness with discontinuous coarse grain. For both interior and exterior building materials, electrical appliances and kitchen equipment.
Sand: NO.4 with 150-180 grit abrasive belt grinding out product. It has better brightness with discontinuous coarse grain, fine stripes than NO.3. For baths, interior and exterior building materials, electrical appliances, kitchen equipment and food equipment.
320 polishing abrasive belt 320 out of the product. It has better brightness with discontinuous coarse grain, fine stripes than NO.4. For baths, interior and exterior building materials, electrical appliances, kitchen equipment and food equipment.
Bristle surface HAIRLINE: HLNO.4 properly size generating polishing abrasive belt grinding continuous pattern product (subdivision number 150 to 320). Mainly used for building decoration, elevators, building door panels.
Bright side: BA impose bright annealed after cold rolling, and after formation of the resulting product. Excellent surface gloss, has a high reflectivity. As the surface of the mirror. For home appliances, mirrors, kitchen equipment, decorative materials.